Best Live centers By Consumer Reports & Ratings

Nowadays Equipments and tools are the must in daily use in house. So,Are you looking for the Live centers for daily use In the USA? If yes then your are landed on the right website we are at By Consumer Reports we have reviewed the “Live centers” which you can consider In your buying list in the month of October 2021.

All these are the top 10 selling Live centers products available on Amazon in Tools and home equipment category with some discount prices you can check it here:

Live centers Comparison Table

Top Live centers Reviews By Consumer Reports October 2021

Here is the top list of Live centers that you can consider in your purchase:

Bestseller No. 1
Oneway Live Center
  • Oneway Model #2064
  • #2 Morse Taper - For most standard and large wood lathes with a #2MT tailstock quill
  • Kit Includes Live Center, Full Point Cone, Bull Nose Cone, Center Point and Knockout Rod
Bestseller No. 2
PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
  • Large live lathe center
  • 60-degree point
  • Ball bearing precision; turns smoothly
  • Huge live center for heavy duty workpieces
  • Cone is 2-1/2" by 1-11/16" overall diameter
Bestseller No. 3
New MT2 Medium Duty Live Center Morse Taper 2MT Triple Bearing Lathe Medium Duty CNC
  • #2 Morse Taper (2MT) shank, 60-degree point
  • 0.0003" Concentricity
  • Material: Carbide Tipped, Made of precise ground hardened steel of high accuracy
  • 5000 Max RPM,12-28 NF Drawbar Thread,Hardened to 61-65 Rockwell
  • High quality triple bearing design (bearings are immersed & sealed)
Bestseller No. 4
Savannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes
94 Reviews
Savannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes
  • A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, vibrates a little or even worse it seizes up and stops working altogether. In many instances, that funny noise or vibration leads to irritating marks or spirals in your project. This can typically be traced to play on a less than perfect factory lathe issued “live center”. The Precision Machined, Heavy Duty, Dual Bearing Live Center from Savannah addresses this issue and more!
  • Precision machined to exacting specifications, the Savannah HD Live Center is the ideal live center for novice and professional alike. With its super smooth design, heat sealed double bearings, 3-3/8" bull nose cone, 60 degree full point cone and removable center spur point this live center is truly a tremendous value that was built to perform.
  • The High quality dual bearings are heat sealed and permanently lubricated to provide vibration free performance while turning and also provide you with years of dependable use. The live center is housed in a durable casing that is made from machined turned steel alloy and is coated with a black oxide finish.
  • This live center runs smooth and true during the turning process and may become your go to live center once you start using it. The Heavy Duty Dual Bearing Live Center Includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This live center will work on lathes that accept Morse Taper 2 tail stocks.
  • The Heavy Duty Dual Bearing Live Center has a 3/4” x 10tpi thread which not only allows you to attach the included accessories, it also allows you to create many different types of turning jigs for offset turning. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, candle stick holders and more! With the included accessories you can Turn bowls, platters, dowels, vases, spheres and more!
Bestseller No. 5
Shars 3MT Medium Duty Live Center #3 Morse Taper Triple Bearing Lathe Medium Duty CNC 202-3437
  • SKU# 202-3437
  • Nose Style Standard; Shank Size: MT3
  • MAX RPM: 3000; Load Capacity lbs: 661
  • TIR (inch) 0.0002"; Head Diameter: 2.05"
  • Point Angle 60; Point Diameter: 1.02"; Point Length: 1.34"
Bestseller No. 6
HFS (R) Heavy Duty Live Tailstock Center (#2 Morse Taper)
  • Size: #2 Morse Taper Cone is 2-1/2" by 1-11/16" overall diameter
  • Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects
  • Note: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)
  • Sturdy: Alloy steel shaft construction for ultimate strength and longevity
  • Packing: Shipped in Protective case for storage
Bestseller No. 7
MT2 Live Center,MT2 High Accuracy Triple Bearing Live Center for Metal Lathe Turning,Live Revolving Center High Precision Medium Turning Tools Parts for Lathe Tailstock Machine
  • Made of high quality metal, high hardness, durable in use.
  • Features excellent dustproof and liquid proof seal, long service life.
  • High accuracy, high rigidity and high wear resistance.
  • Professional manufacturing for good working performance
  • Suitable for high speed lathe, CNC lathe, and general manual lathe.
Bestseller No. 8
Accusize Industrial Tools MT3 Precision Medium Duty Live Center, Overall Length 6.69'', 0537-6437
  • Precision Medium Duty Live Center For General Purpose On Manual Engine Lathe
  • Accuracy guaranteed within 0.0003"; Overall Length: 6.69";
  • The live center has a combination of deep groove ball bearing, thrust ball bearing and needle bearing.
  • The anti-dust seal can prevent cutting fluid and dust from entering into the center bearing
  • The 60° rotating spindle is made from carbon alloy steel with heat treatment to HRC 58±2 for high rigidity and wears resistance
Bestseller No. 9
[GG] MT4 CNC High Speed Live Center ; Extended A Type (4BNL30A:015004)
  • MT4 size with extended A type point (heat treatment hardness of shaft HRc 60±2)
  • Accuracy guaranteed to 0.003mm TIR (0.0001")
  • Excellent for high speed work on CNC and conventional machines. (Max rpm is 3,800)
  • High accuracy triple bearing structure
  • High performance lip seal and deflected shaft design protects bearing space from ingress by dust and coolant
Bestseller No. 10
WEN LA1334 3/4-Inch MT2 Crown Revolving Live Center for Wood Lathes
  • Crafted with maximum precision for high accuracy performance
  • Internal ball bearings provide a smooth, concentric ride for your workpiece
  • Spacious multi-tooth live center provides support to larger projects
  • Crown measures in at 3/4 inches in diameter
  • Taper fits perfectly into any lathe with an MT2 tailstock

Recommended Products based on Live centers by Consumer Reports October 2021

Leave a Comment